Titan Aero
-
Titan Aero Maintenance Kit
$64.99Select options This product has multiple variants. The options may be chosen on the product pageThese are all the parts you need to get your Titan Aero Hotend all fixed up. Start Fresh with all compnents.
NOZZLE IS SEPERATE.
-
IT-Works 3d Titan Aero PRO High Temp Toolhead for TAZ
$480.84 – $585.84Select options This product has multiple variants. The options may be chosen on the product pageIT-Works Titan Aero PRO High Temp Toolhead (HT) is based off the same platform as our Titan Aero PRO toolhead.
It has the upgraded parts necessary to allow you to print in High temperature materials. Upgrade and utilize your current TAZ Printer for printing high temperature exotic filaments like Polycarbonate, PEI, Etc.
You can still print all of the normal filaments with this toolhead, just change the nozzle to a hardened one and you are ready to print abrasive materials. This toolhead is compatible with a v6/volcano parts that are offered.
This will allow printing up to 500C depending on how you set your firmware up. Will come with a PT1000 temp sensor good up to 500c
Please note, There are inherent risks of printing with high temperatures. IT-Works 3d will not be held responsible for any damages that occur from using this toolhead.
-
Refurbished – 2.85mm E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
Original price was: $426.25.$394.75Current price is: $394.75.Read moreMAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
THIS IS FOR A REFURBISHED 2.85mm TOOLHEAD THAT HAS BEEN FULLY TESTED FOR FUNCTIONALITY.
-
Idler Tube Clamps for E3D Titan Aero Toolheads
$5.25Select options This product has multiple variants. The options may be chosen on the product pageThese tube clamps work with the E3D Style toolheads. This clamps on to the Idler Lever and allows the lulzbot filament guide tube to attach to the toolhead which keeps it from kinking while traveling.
These come on a Lulzbot TAZ PRO for the Dual extruder where Green is #1 extruder and Black is #2 extruder.
-
Lulzbot Mini 2 3d Printer – IT-Works 3d Refurbished
Original price was: $1,195.98.$999.99Current price is: $999.99.Read moreLulzbot Mini 2 3d Printer – IT-Works 3d Refurbished
These Mini 2’s have been fully cleaned, repaired if needed and fully tested to ensure full functionality. They come with a 90 Day Parts Warranty. They will come with as many of the parts that they came with when new as we can provide. May not have original box.
A versatile, high performance desktop 3D printer engineered to deliver premium results print after print. Compact, portable, and scalable, the Mini 2 features numerous upgrades over the original LulzBot Mini:
- 20% larger build volume with no increase in footprint
- Innovative belt-driven Z-axis for better print quality and faster cycle times
- GLCD Controller for tetherless 3D printing
- Prints both rigid and flexible filaments out of the box
- Whisper quiet operation
Do not forget, you can pair this printer with our IT-Works 3d Titan Aero or Titan Aero PRO or PRO “X” toolheads that come in either 2.85mm or 1.75mm. Get yourself the extra toolhead that allows different size filament, or the ability to print abrasive filament, or even the Volcano to print extra large and strong layers.
-
E3D High Precision Heater Cartridges
$19.80Select options This product has multiple variants. The options may be chosen on the product pageA powerful heater for your HotEnd, with improved reliability and highly precise temperature output. A high-tolerance canister boosts thermal efficiency, while a built-in Molex connector makes removing your HotEnd from your 3D printer easier than ever.
Unpinned. You will need to purchase the correct pins for your setup. If you measure your current wires and purchase the correct pins, we can cut and pin this heater upon request.
-
IT-Works 3d Titan Aero PRO “X” for Lulzbot 3d Printers
$379.00 – $517.60Select options This product has multiple variants. The options may be chosen on the product pageNow Print Abrasive, Solid, and Flexible filaments on your LulzBot® 3D printer without changing toolheads!
The IT-Works 3d Titan Aero PRO “X” Toolhead for Lulzbot 3d printers comes standard with Hardened Hobb Gear, .5mm or 1.2mm E3D Hardened Steel Nozzle “X”, E3D Precision 40w, a Polycarbonate fan duct and either a E3D Titanium Heat Break for 1.75mm or a Micro Swiss Wear Resistant Heat Break for 3mm.
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with Lulzbot® auto leveling systems
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
IF YOU ORDER THE TAZ 5/6 VERSION, YOU WILL NOT NEED AN ADAPTER FOR THE TAZ 5/6. IF YOU ORDER IT FOR A MINI 2/WORKHORSE/PRO TOOLHEADS AND WANT IT TO WORK ON THE TAZ 5 OR 6 AS WELL, YOU WILL NEED AN ADAPTER.
https://itworks3d.com/product/universal-tool-head-adapter-taz-5-6/
https://itworks3d.com/product/universal-tool-head-adapter-mini-1/
-
E3D Titan Aero PRO toolhead for Lulzbot Mini
$352.75 – $384.25Select options This product has multiple variants. The options may be chosen on the product pagePrint solid, flexible and abrasive filaments on your LulzBot® Mini 3D printer without changing toolheads!
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® Mini auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
Refurbished – It-Works 3d Titan Aero PRO Toolhead 2.85mm
$325.49Read moreTHIS TOOLHEAD IS A RETURN AND HAS BEEN GONE THROUGH, HAD ANY NECESSARY PARTS REPLACED, CLEANED AND TESTED. HAS THE IT-WORKS 3D 60-DAY WARRANTY! COLOR MAY VARY, GREEN OR BLUE.
Now Print Abrasive, Solid, and Flexible filaments on your LulzBot® TAZ 6 3D printer without changing toolheads!
The E3D Titan Aero PRO Toolhead for TAZ 6 comes standard with Hardened Hobb Gear, .5mm E3D Hardened Steel Nozzle, and either a E3D Titanium Heat Break for 1.75mm or a Micro Swiss Wear Resistant Heat Break for 3mm.
Our Toolhead utilizes a new 360 Degree cooling Duct with a built in LED so you can see exactly is going on with your prints.
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
