E3D Titan Aero
E3D Titan Aero Toolheads for LulzBot 3D Printers
-
Lulzbot SE 2.85mm .5 Toolhead – NEW
Original price was: $309.75.$273.00Current price is: $273.00.This is a brand new never used Lulzbot SE toolhead. Built for 2.85mm filament with a copper .5mm nozzle.
Will fit Any Mini 2/Workhorse/TAZ Pro without any adapter. Will fit TAZ 5/6 with a Universal Adapter for TAZ, or Mini v1’s with a Universal Adapter for Mini.
Will ship without original packaging.
-
IT-Works 3d Titan Aero PRO High Temp Toolhead for TAZ
$480.84 – $585.84IT-Works Titan Aero PRO High Temp Toolhead (HT) is based off the same platform as our Titan Aero PRO toolhead.
It has the upgraded parts necessary to allow you to print in High temperature materials. Upgrade and utilize your current TAZ Printer for printing high temperature exotic filaments like Polycarbonate, PEI, Etc.
You can still print all of the normal filaments with this toolhead, just change the nozzle to a hardened one and you are ready to print abrasive materials. This toolhead is compatible with a v6/volcano parts that are offered.
This will allow printing up to 500C depending on how you set your firmware up. Will come with a PT1000 temp sensor good up to 500c
Please note, There are inherent risks of printing with high temperatures. IT-Works 3d will not be held responsible for any damages that occur from using this toolhead.
-
Refurbished – 2.85mm E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
Original price was: $426.25.$394.75Current price is: $394.75.MAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
THIS IS FOR A REFURBISHED 2.85mm TOOLHEAD THAT HAS BEEN FULLY TESTED FOR FUNCTIONALITY.
-
Idler Tube Clamps for E3D Titan Aero Toolheads
$5.25These tube clamps work with the E3D Style toolheads. This clamps on to the Idler Lever and allows the lulzbot filament guide tube to attach to the toolhead which keeps it from kinking while traveling.
These come on a Lulzbot TAZ PRO for the Dual extruder where Green is #1 extruder and Black is #2 extruder.
-
IT-Works 3d Titan Aero PRO “X” for Lulzbot 3d Printers
$379.00 – $517.60Now Print Abrasive, Solid, and Flexible filaments on your LulzBot® 3D printer without changing toolheads!
The IT-Works 3d Titan Aero PRO “X” Toolhead for Lulzbot 3d printers comes standard with Hardened Hobb Gear, .5mm or 1.2mm E3D Hardened Steel Nozzle “X”, E3D Precision 40w, a Polycarbonate fan duct and either a E3D Titanium Heat Break for 1.75mm or a Micro Swiss Wear Resistant Heat Break for 3mm.
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with Lulzbot® auto leveling systems
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
IF YOU ORDER THE TAZ 5/6 VERSION, YOU WILL NOT NEED AN ADAPTER FOR THE TAZ 5/6. IF YOU ORDER IT FOR A MINI 2/WORKHORSE/PRO TOOLHEADS AND WANT IT TO WORK ON THE TAZ 5 OR 6 AS WELL, YOU WILL NEED AN ADAPTER.
https://itworks3d.com/product/universal-tool-head-adapter-taz-5-6/
https://itworks3d.com/product/universal-tool-head-adapter-mini-1/
-
E3D Titan Aero PRO toolhead for Lulzbot Mini
$352.75 – $384.25Print solid, flexible and abrasive filaments on your LulzBot® Mini 3D printer without changing toolheads!
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® Mini auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
Refurbished – It-Works 3d Titan Aero PRO Toolhead 2.85mm
$325.49THIS TOOLHEAD IS A RETURN AND HAS BEEN GONE THROUGH, HAD ANY NECESSARY PARTS REPLACED, CLEANED AND TESTED. HAS THE IT-WORKS 3D 60-DAY WARRANTY! COLOR MAY VARY, GREEN OR BLUE.
Now Print Abrasive, Solid, and Flexible filaments on your LulzBot® TAZ 6 3D printer without changing toolheads!
The E3D Titan Aero PRO Toolhead for TAZ 6 comes standard with Hardened Hobb Gear, .5mm E3D Hardened Steel Nozzle, and either a E3D Titanium Heat Break for 1.75mm or a Micro Swiss Wear Resistant Heat Break for 3mm.
Our Toolhead utilizes a new 360 Degree cooling Duct with a built in LED so you can see exactly is going on with your prints.
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
Refurbished – 1.75mm E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
Original price was: $457.75.$426.25Current price is: $426.25.MAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
THIS IS FOR A REFURBISHED 1.75mm TOOLHEAD THAT HAS BEEN FULLY TESTED FOR FUNCTIONALITY.
-
Universal Tool Head Adapter: Mini 1
$31.50Universal Tool Head Adapter: Mini 1
The Universal Mounting System allows users to mount the latest generation of LulzBot Tool Heads to their LulzBot Mini 1.
Compatibile with:
- LulzBot SL Tool Head | Small Layer (Micro) | 0.25 mm
- LulzBot HS Tool Head | Hardened Steel | 0.8 mm
- LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm
Works with: LulzBot Mini 1 -
Universal Tool Head Adapter: TAZ 5/6
$31.50The Universal Mounting System allows users to mount the latest generation of LulzBot Tool Heads to their LulzBot TAZ 5 & 6.
Compatibile with:
- LulzBot SL Tool Head | Small Layer (Micro) | 0.25 mm
- LulzBot HS Tool Head | Hardened Steel | 0.8 mm
- LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm
Works with: LulzBot TAZ 6, LulzBot TAZ 5 -
E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
$426.25 – $457.75MAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
Demo – It-Works 3d Titan Aero PRO Toolhead
$335.99 – $346.49Demo Unit The E3D Titan Aero PRO Toolhead for TAZ 6
These toolheads are ones we build for shows, and conferences. They are a used toolhead that has only been used for 1 or 2 days depending on the show.
They are used but still in great condition, and we cannot sell them as new. So the savings get passed on to you!
Colors of body may vary, but most likely will be our signature blue.