TAZ 6 Parts
-
TAZ 6 Archim 2 Upgrade Kit
$350.00Read moreThis kit contain all the parts you will need to upgrade your TAZ 6 from the Rambo 1.3/1.4 to a Archim 2 32-bit board.
The Archim 2 utilizes 32-bit processing as opposed to the normal boards that are 8 bit. This means faster calculations from the processor.
It also utilizes TMC2130 Drivers which are much more quiet then the standard Rambo driver. Together, this will mean smoother more quiet operation of your TAZ 6.
PICTURES COMING SOON!
-
Z Axis Lead Screw for TAZ
$82.50Add to cartFeaturing a large, 12 mm diameter, these metric lead screws move the Z-axis smoothly and reliably. When building a DIY RepRap 3D printer, choose a metric Z-axis lead screw to allow for all layer height increments. Each lead screw has machined ends, one sized for a 608 bearing, and the other side sized for 5mm stepper motor couplers.
Designed as a direct replacement for the TAZ 6, this lead screw is compatible with the LulzBot TAZ 5.
Priced Individually, not a set. Order 2 if you need a set.
-
LulzBot TAZ Glass/PEI Print Surface
$75.00Add to cartLulzbot TAZ Glass/PEI Print Surface
This borosilicate glass PEI print bed system ensures your LulzBot TAZ is going strong for years to come with improved ease-of-maintenance, increased versatility, and better heat uniformity across the bed surface. The system is an easy and smart upgrade to a LulzBot TAZ 3D Printer (compatible with 24-volt versions only, TAZ 3-6, Pro, and Workhorse).
This LulzBot TAZ 3D printer surface is the upper half of the Modular Print Bed System and features a PEI (Polyetherimide) sheet laminated to a borosilicate glass plate.
If you are looking for a complete system you will also need the Modular Etched Heater found here: Etched TAZ Modular Heater
-
LulzBot TAZ Etched Modular Print Bed Heater
$140.00Read moreLulzBot TAZ Etched Modular Print Bed Heater
The LulzBot TAZ Modular 3D Printer Bed System ensures your LulzBot TAZ is going strong for years to come with improved ease-of-maintenance, increased versatility, and better heat uniformity across the bed surface. The 3D printer heated bed system is an easy and smart upgrade to a LulzBot TAZ 3D Printer (compatible with 24-volt versions only, TAZ 3-6, Workhorse, and Pro).
The LulzBot TAZ Modular 3D Printer Bed is the lower half of the TAZ Modular Print Bed System and features a silicone heat pad vulcanized to a stainless-steel heat spreader.
If you are looking for a complete system you will also need the Glass bed found here: Glass/PEI Surface
-
New Style TAZ Wiper Pads – 2 pack
$6.00Add to cartDo you need a better wiping solution for your Lulzbot printer with wipe function?
Look no further as these wiping pads will help keep your nozzle clean before the wiping sequence.
Wiper pads are used in pairs. Instead of folding a large one, you use two that way you can use both sides instead of throwing one pad away, you get two uses out of it.
-
Mini 2 PRO Volcano fan duct in Polycarbonate for High Temp printing
$10.00Select optionsMini 2 PRO Volcano fan duct in Polycarbonate for High Temp printing
We have printed our PRO fan duct using a Polycarbonate filament for higher temperature resistance which allows you to print higher temp materials without you having to worry about melting the fan duct while printing with high temp filaments.
-
Mini 1/2 PRO fan duct in Polycarbonate for High Temp printing
$10.00Select optionsMini 1/2 PRO fan duct in Polycarbonate for High Temp printing
We have printed our PRO fan duct using a Polycarbonate filament for higher temperature resistance which allows you to print higher temp materials without you having to worry about melting the fan duct while printing with high temp filaments.
