TAZ 5
-
TAZ 4/5/6 Aluminum Z Uppers
$60.00Select optionsDesigned by IT-Works 3d, these Aluminum Z-Uppers will help keep your frame rigid. Made to mimic the TAZ Workhorse and TAZ PRO, they will keep your frame much tighter then the original 3d printed z-upper.
This is a 2 piece kit that includes the 3d printed lower assembly and the Aluminum upper. Will come with all necessary hardware to attach to your printer.
Available both for the TAZ 4/5, and the TAZ 6. Sold in Pairs.
-
Z Axis Lead Screw for TAZ
$82.50Add to cartFeaturing a large, 12 mm diameter, these metric lead screws move the Z-axis smoothly and reliably. When building a DIY RepRap 3D printer, choose a metric Z-axis lead screw to allow for all layer height increments. Each lead screw has machined ends, one sized for a 608 bearing, and the other side sized for 5mm stepper motor couplers.
Designed as a direct replacement for the TAZ 6, this lead screw is compatible with the LulzBot TAZ 5.
Priced Individually, not a set. Order 2 if you need a set.
-
Refurbished – 2.85mm E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
$394.75Add to cartMAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
THIS IS FOR A REFURBISHED 2.85mm TOOLHEAD THAT HAS BEEN FULLY TESTED FOR FUNCTIONALITY.
-
IT-Works 3d Titan Aero PRO “X” for Lulzbot 3d Printers
$379.00 – $517.60Select optionsNow Print Abrasive, Solid, and Flexible filaments on your LulzBot® 3D printer without changing toolheads!
The IT-Works 3d Titan Aero PRO “X” Toolhead for Lulzbot 3d printers comes standard with Hardened Hobb Gear, .5mm or 1.2mm E3D Hardened Steel Nozzle “X”, E3D Precision 40w, a Polycarbonate fan duct and either a E3D Titanium Heat Break for 1.75mm or a Micro Swiss Wear Resistant Heat Break for 3mm.
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with Lulzbot® auto leveling systems
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
IF YOU ORDER THE TAZ 5/6 VERSION, YOU WILL NOT NEED AN ADAPTER FOR THE TAZ 5/6. IF YOU ORDER IT FOR A MINI 2/WORKHORSE/PRO TOOLHEADS AND WANT IT TO WORK ON THE TAZ 5 OR 6 AS WELL, YOU WILL NEED AN ADAPTER.
https://itworks3d.com/product/universal-tool-head-adapter-taz-5-6/
https://itworks3d.com/product/universal-tool-head-adapter-mini-1/
-
500 Watt Power Supply for TAZ 4 and 5
$164.99 – $189.99Select options500 Watt Power Supply for TAZ 4 and 5
This was designed for the TAZ 4 and 5 to replace the Metal power supply that Lulzbot created. When you need a new supply and use a dual extruder, this is the perfect addition to your TAZ 4 or TAZ 5.
Has Built in Cooling Fan to keep it working properly under any load situation.
-
Refurbished – 1.75mm E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
$426.25Read moreMAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
THIS IS FOR A REFURBISHED 1.75mm TOOLHEAD THAT HAS BEEN FULLY TESTED FOR FUNCTIONALITY.
-
Taz PRO/Volcano fan duct in Polycarbonate for High Temp printing
$10.00Select optionsTaz PRO/Volcano fan duct in Polycarbonate for High Temp printing
We have printed our PRO fan duct using a Polycarbonate filament for higher temperature resistance which allows you to print higher temp materials without you having to worry about melting the fan duct while printing with high temp filaments.
-
E3D Titan Aero PRO Toolhead for LULZBOT TAZ 5/6
$352.75 – $384.25Select optionsNow Print Abrasive, Solid, and Flexible filaments on your LulzBot® TAZ 6 3D printer without changing toolheads!
The E3D Titan Aero PRO Toolhead for TAZ 6 comes standard with Hardened Hobb Gear, .5mm E3D Hardened Steel Nozzle, and either a E3D Titanium Heat Break for 1.75mm or a Micro Swiss Wear Resistant Heat Break for 3mm.
Our Toolhead utilizes a new 360 Degree cooling Duct with a built in LED so you can see exactly is going on with your prints.
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
WE ALSO NOW OFFER A FAN DUCT THAT WILL WITHSTAND HIGH TEMPERATURE PRINTING. PRINTED IN POLYCARBONATE. SEE HERE
