Welcome to IT-Works 3D
-
Z Axis Lead Screw for TAZ
$82.50Featuring a large, 12 mm diameter, these metric lead screws move the Z-axis smoothly and reliably. When building a DIY RepRap 3D printer, choose a metric Z-axis lead screw to allow for all layer height increments. Each lead screw has machined ends, one sized for a 608 bearing, and the other side sized for 5mm stepper motor couplers.
Designed as a direct replacement for the TAZ 6, this lead screw is compatible with the LulzBot TAZ 5.
Priced Individually, not a set. Order 2 if you need a set.
-
IT-Works 3d Titan Aero PRO High Temp Toolhead for TAZ
$480.84 – $585.84IT-Works Titan Aero PRO High Temp Toolhead (HT) is based off the same platform as our Titan Aero PRO toolhead.
It has the upgraded parts necessary to allow you to print in High temperature materials. Upgrade and utilize your current TAZ Printer for printing high temperature exotic filaments like Polycarbonate, PEI, Etc.
You can still print all of the normal filaments with this toolhead, just change the nozzle to a hardened one and you are ready to print abrasive materials. This toolhead is compatible with a v6/volcano parts that are offered.
This will allow printing up to 500C depending on how you set your firmware up. Will come with a PT1000 temp sensor good up to 500c
Please note, There are inherent risks of printing with high temperatures. IT-Works 3d will not be held responsible for any damages that occur from using this toolhead.
-
Lulzbot 3d Bio Printer FRESH Certified
$9,950.00The LulzBot Bio is a FRESH certified bioprinter ready for use with bioinks, unmodified collagen, and other soft materials for pharmaceutical/cosmetic testing, tissue engineering, and regenerative medicine.
The LulzBot Bio combines versatility with exceptional print quality in a compact and easy-to-use bioprinter. Certified for FRESH printing, the Bio includes everything you need to get started printing bioinks, unmodified collagen, and other soft materials. With an Open Source design and less than an hour of out-of-the-box setup time, the Bio’s capabilities can grow as fast as your innovation.
Bioprinting is revolutionizing pharmaceutical development, cosmetic testing, tissue engineering, and regenerative medicine. 3D bioprinted tissues can be used to mimic in vivo conditions, enabling organizations to better predict efficacy and toxicology of potential drugs early on in the drug discovery process.
What have they printed with a LulzBot Bio?
- Functional tissues with contractility (includes heart tissues)
- Collagen heart valve that can support pulsatile flow
- Have not tested in animals yet but have simulated blood flow
- Beating ventricle made of human heart cells
- Multi-scale vasculature (from 5mm down to 100 μm)
- Was able to support cells living around that vessel network
- Artery trees
Materials:
- Sodium Alginate – Rapid prototyping material derived from brown seaweed.
- Translucent therefore requires dye to be seen when suspended in water/alcohol.
- LifeSupport must be mixed with calcium chloride 0.1% solution to enable crosslinking.
- Collagen – Highly important protein in the body.
- The LulzBot Bio is ready to print unmodified collagen. This is very important as we are closer to mimicking human physiology.
- Pure collagen can be printed down to 20 μm.
- Can be crosslinked with a PH change via addition of acetic acid (main component of vinegar apart from water).
- Cells –
- Usually these are stem cells.
- Can only be printed down to 100 μm needle. Smaller needles will impact cell viability.
- Cells need to touch each other to maintain cell viability.
- After printing they must be placed in cell culture incubator at 37°c
- More to come: Fibrin, hyaluronic acid, termosets
-
LulzBot Mini/Mini 2 Glass/PEI Print Surface
$40.00Lulzbot Mini/Mini 2 Glass/PEI Print Surface
This borosilicate glass PEI print bed system ensures your LulzBot Mini/Mini 2 is going strong for years to come with improved ease-of-maintenance, increased versatility, and better heat uniformity across the bed surface. The system is an easy and smart upgrade to a LulzBot Mini/Mini 2 3D Printer (compatible with 24-volt versions only).
This LulzBot Mini/Mini 2 3D printer surface is the upper half of the Modular Print Bed System and features a PEI (Polyetherimide) sheet laminated to a borosilicate glass plate.
-
LulzBot TAZ Glass/PEI Print Surface
$75.00Lulzbot TAZ Glass/PEI Print Surface
This borosilicate glass PEI print bed system ensures your LulzBot TAZ is going strong for years to come with improved ease-of-maintenance, increased versatility, and better heat uniformity across the bed surface. The system is an easy and smart upgrade to a LulzBot TAZ 3D Printer (compatible with 24-volt versions only, TAZ 3-6, Pro, and Workhorse).
This LulzBot TAZ 3D printer surface is the upper half of the Modular Print Bed System and features a PEI (Polyetherimide) sheet laminated to a borosilicate glass plate.
If you are looking for a complete system you will also need the Modular Etched Heater found here: Etched TAZ Modular Heater
-
New Style TAZ Wiper Pads – 2 pack
$6.00Do you need a better wiping solution for your Lulzbot printer with wipe function?
Look no further as these wiping pads will help keep your nozzle clean before the wiping sequence.
Wiper pads are used in pairs. Instead of folding a large one, you use two that way you can use both sides instead of throwing one pad away, you get two uses out of it.