Category: LulzBot TAZ 5

Posted on by — Leave a comment

3 Lulzbot Mini Refurbs, TAZ 5 Refurb in stock now!!

We have 2 1.04 Mini’s in stock with LCD Screen installed ready to go right now for $995.98.  We also have a 1.03 Mini without the screen upgrade for $800.00.

All printers being refurbished have gone through tested and had any parts the were necessary replaced with new if they needed.  Thoroughly cleaned and ready to go!

https://itworks3d.com/product-category/3dprinters/lulzbot_mini_3d_printers/

TAZ 5 Refurb is also available for 1295.98, all with a 90 day parts warranty.

https://itworks3d.com/product/lulzbot-taz-5-refurbished/

Also don’t forget to get your pre-order in for your TAZ Workhorse printer.  https://itworks3d.com/product/lulzbot-taz-workhorse-edition-printer-pre-order/.  These will ship in the order the Pre-Orders arrive so get them in now!  We have 1.75mm and 3mm toolheads available for these as soon as they come out, so get your toolhead on order as well.  https://itworks3d.com/product-category/toolheads/e3d-titan-aero/

 

 

 

 

 

 

If you have any questions feel free to email is at [email protected]

Posted on by — Leave a comment

3D Printing Nerd Joel Telling utilizes IT-Works 3d PRO toolhead

We are glad that Joel Telling(3D Printing Nerd) is using his Titan Aero PRO toolhead for TAZ.  If you need to upgrade your TAZ or Mini 1/2 printers, these toolheads are a great addition to your printers, and will produce excellent results.  Contact us for more info, or visit our toolhead page to get yours today!!!

https://itworks3d.com/product-category/toolheads/

Posted on by — Leave a comment

How to change Nozzle Heat block and Heat Break on E3D Titan Aero

Changing the nozzle, heater block, and heat break on the E3D Titan Aero V6 and Volcano hotend is easy. Our video shows you how to replace or swap them.

Posted on by — Leave a comment

New E3D VOLCANO Titan Aero toolhead for TAZ

MAKE STRONG PRINTS FAST WITH YOUR LulzBot® Taz 3D PRINTER!

The newly released www.itworks3d.com E3D Titan Aero Volcano toolhead for Taz features a 1.2mm nozzle that allows tall layer heights and wide line widths that boost print speed to 80-100 grams per hour or more. This toolhead is compatible with Taz 5 and Taz 6 using the profiles and firmware LulzBot® developed and shared (Thank you!) for their MOARSTRUDER toolhead.
Our toolhead featured the E3D Titan Aero extruder, which features a short, controlled filament path for accurate extrusion, and employs our surround filament cooling duct for improved print cooling performance and quality. Special launch sale price of only $349. Regularly $389

9″ / 225mm tall 200 gram vase printed in 2 hours with the IT-Works E3D Voalcano TItan Aero toolhead for Taz Design is Benito Sanducci’s Gosper Fractal Vase design

Available in for either 3mm or 1.75mm filament!

Compatible with the full range of E3D Volcano nozzles, including wear resistant hardened steel, and high temperature coated copper

Posted on by — Leave a comment

Updated E3D Titan Aero Toolhead for Taz now available.

Following on the success of our toolhead based on the E3D Titan Aero extruder and hotend for the Taz that prints both solid and flexible filaments in either 3mm or 1.75mm, we have updated and released a new version!

Upgrades include:

  • Lighter half height stepper motor increases print accuracy by reducing toolhead mass
  • Revised filament cooling duct with outlets on the front, back, left, and right tuned for even surrounding filament cooling
  • Updated mount increases stiffness and accessibility
  • Compatible with Taz 5 and 6 (and also prior Tazs with a few updates)

Bought the prior version and want to upgrade? Sure! we have several options (coming soon), listed on the E3D Titan Aero Toolhead product page.