Description
This nozzle is a direct swap or replacement for use on the Budaschnozzle 2.0 hot end.
Available in .25mm, .35mm and .5mm,
This nozzle is compatible with the Budaschnozzle 2.0. This nozzle is not compatible with any of the 1.x Budaschnozzle versions. Buda 2 has a coarser thread than Buda 1- we’ve added a picture for easy comparison!
Budaschnozzle 2 threads are M10 x 1.5
If you have already printed with your Budaschnozzle you will have to loosen the nozzle after the hot end has reached 160C. Unless heated past 160C, any ABS/PLA on the threads will influence how easily the items can be moved. Removing the nozzle with the hot end cold, with the presence of plastic on the threads can potentially damage the nozzle threads/threaded extension
When re-installing the nozzle, slightly thread the nozzle onto the threaded extension, only one thread then set the hot end temperature to 160C. Once the hot end has reached 160C power down the printer and finish installing the nozzle.Take extreme caution when handling the hot end when at high temperatures; when at 160C the hot end can cause severe burns. Use a pair of pliers or thick leather gloves when handling the hot end when at extrusion/melt temperatures. If your hot end has not been used the nozzle can be removed with the hot end at room temperature.
Reviews
There are no reviews yet.