E3D
-
Refurbished – It-Works 3d Titan Aero PRO Toolhead 2.85mm
$325.49Read moreTHIS TOOLHEAD IS A RETURN AND HAS BEEN GONE THROUGH, HAD ANY NECESSARY PARTS REPLACED, CLEANED AND TESTED. HAS THE IT-WORKS 3D 60-DAY WARRANTY! COLOR MAY VARY, GREEN OR BLUE.
Now Print Abrasive, Solid, and Flexible filaments on your LulzBot® TAZ 6 3D printer without changing toolheads!
The E3D Titan Aero PRO Toolhead for TAZ 6 comes standard with Hardened Hobb Gear, .5mm E3D Hardened Steel Nozzle, and either a E3D Titanium Heat Break for 1.75mm or a Micro Swiss Wear Resistant Heat Break for 3mm.
Our Toolhead utilizes a new 360 Degree cooling Duct with a built in LED so you can see exactly is going on with your prints.
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
E3D High Temperature Heater Cartridge
$75.90Add to cartHeaters capable of operating up to 550°C for extended periods of time. For printing high temperature thermoplastics. Come with high amperage connectors and extension leads, the cartridge has the wires exiting at a 90° angle from the casing with a strain relief.
Voltage: 12V/24V
Power: Up to 65W
Max operating temp: 550°C.
Lead length: 2m
⚠️WARNINGS⚠️
– These heaters are more than capable of reaching temperatures that will soften the aluminium block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.
-
E3D Titan Aero PRO Toolhead for Mini 2/TAZ WORKHORSE/TAZ PRO/SIDEKICK
$375.95 – $405.95Select options This product has multiple variants. The options may be chosen on the product pagePrint solid and flexible filaments on your LulzBot® Mini 2 and TAZ Workhorse 3d printers
- Simple installation- Bolt it on, plug it in, adjust ESTEPs, Adjust Profiles, and PRINT! *
- Compatible with LulzBot® Mini auto leveling
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
Refurbished – 1.75mm E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
Original price was: $457.75.$426.25Current price is: $426.25.Read moreMAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
THIS IS FOR A REFURBISHED 1.75mm TOOLHEAD THAT HAS BEEN FULLY TESTED FOR FUNCTIONALITY.
-
E3D Nozzle X – Volcano
$36.30Select options This product has multiple variants. The options may be chosen on the product pageE3D Nozzle X – Volcano
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which provides a fantastic balance of cost and wear resistance. The cherry on the top? Our NEW WS2 ‘polyphobic’ nano coating, no longer will you find hot molten polymers sticking to your nozzle
-
E3D Volcano Titan Aero for Lulzbot Mini 2/TAZ Workhorse/TAZ PRO/SIDEKICK
$328.95 – $338.95Select options This product has multiple variants. The options may be chosen on the product pagePRINT IN LARGE LAYERS WITH SPEED AND STRENGTH!!
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® Mini 2/TAZ PRO auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
E3D Volcano Titan Aero PRO toolhead for Lulzbot TAZ
$426.25 – $457.75Select options This product has multiple variants. The options may be chosen on the product pageMAKE HIGH SPEED STRONG FUNCTIONAL PRINTS WITH YOUR TAZ
- Simple installation- Bolt it on, plug it in, flash firmware, adjust ESTEPs, and PRINT! *
- Compatible with LulzBot® TAZ 6 auto leveling
- Available in 3mm and 1.75mm
* Yes, really! There are a few adjustments that are necessary for printing with flexible filament or 1.75mm filament. We have good guides for all those below.
-
E3D Volcano Nozzles – Plated Copper
$17.59Select options This product has multiple variants. The options may be chosen on the product pageDurable, non-stick, extremely high temperature performance Volcano nozzles. Take your your 3D printing to the next level by modifying your Volcano with these nozzles. Made from a unique copper alloy, they will not begin to soften or anneal below 500°C, and they are highly resistant to debris and burnt-on plastic thanks to their nickel coating. Compatible with the Lulzbot Moarstruder.
-
E3D Nozzles – Plated Copper
$14.29Select options This product has multiple variants. The options may be chosen on the product pageDurable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can’t handle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
-
Titan Aero Mirrored Mounting Body – BLEMS
$15.00Add to cartThese Titan Aero Mount Bodies didn’t meet our standards, but they would still be functional for someone who needed a cheap spare body in case something happens, or to build a second toolhead.
They will still work and mount just fine, we just didn’t like the first layer on the back side. Holes/Uneven
NOT VOLCANO
