Description
High-temperature performance
The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.
Easy to use
The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.
Precise
Our all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.
Key features:
– All metal heatbreak
– Maximum temperature: 285ºC
– Cartridge style heater block
– Groove mount
Kit includes:
– 1 x V6 heatsink 2.85mm
– 1 x V6 heatbreak 2.85mm
– 1 x V6 brass 0.4mm nozzle 2.85mm
– 1 x V6 duct
– 1 x V6 aluminium heater block
– 1 x Heater cartridge 24V
– 1 x Thermistor cartridge
– 1 x Thermistor extension cable
– 1 x 30 x 30 x 10 fan 24V
– 1 x Thermal compound
– 1 x V6 fixings kit
– 1 x V6 silicone sock
Reviews
There are no reviews yet.