E3D High Temperature Heater Cartridge

Heaters capable of operating up to 550°C for extended periods of time. For printing high temperature thermoplastics. Come with high amperage connectors and extension leads, the cartridge has the wires exiting at a 90° angle from the casing with a strain relief.

Voltage: 12V/24V

Power: Up to 65W

Max operating temp: 550°C.

Lead length: 2m

⚠️WARNINGS⚠️

– These heaters are more than capable of reaching temperatures that will soften the aluminium block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.