plated
-
E3D Volcano Nozzles – Plated Copper
$17.59Select optionsDurable, non-stick, extremely high temperature performance Volcano nozzles. Take your your 3D printing to the next level by modifying your Volcano with these nozzles. Made from a unique copper alloy, they will not begin to soften or anneal below 500°C, and they are highly resistant to debris and burnt-on plastic thanks to their nickel coating. Compatible with the Lulzbot Moarstruder.
-
E3D Nozzles – Plated Copper
$14.29Select optionsDurable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can’t handle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
-
E3D Copper Volcano Starter Kit 24v
$90.00Select optionsPrint big and fast! The plated copper Volcano upgrades your V6 or Aero HotEnd to print bigger, faster, and stronger parts. Easily swap your V6 heater block and nozzles to Volcano for large-scale 3D printing.
Plated Copper-Alloy Volcano Heater Block
These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350°C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.
In addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can’t be used.
A plated copper nozzle is included for the ultimate extrusion pairing!
-
E3D V6 Heater Block
$19.80 – $29.70Select optionsE3D V6 Heater Block in both Aluminum and Nickel Plated Copper.
Aluminum is Standard
Copper is built for high temp printing about 300 degrees. Cannot use sock at temps above 300. You will need to adjust your top temperature in your firmware for high temp printing. Also above 500 deg. C a PT100 thermistor is needed for fine tuning the temperature.
-
Micro Swiss Nozzle Plated Wear Resistant RepRap – M6 Thread (E3D V5-V6, Prusa i3 MK2) 1.75mm and 3mm
$14.99Select optionsThis RepRap style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
