E3D Hemera Extruder Direct Drive Kit 1.75mm 24v
E3D Hemera – formerly Hermes – is the best extrusion system we’ve ever made. It combines our market-leading V6 HotEnd with an all-new filament drive to form a highly responsive direct drive extrusion system – providing unrivalled performance with flexible filaments.
Lulzbot Toolhead featuring the Hemera extruder coming soon!!
E3D High Precision Heater Cartridges$19.80
A powerful heater for your HotEnd, with improved reliability and highly precise temperature output. A high-tolerance canister boosts thermal efficiency, while a built-in Molex connector makes removing your HotEnd from your 3D printer easier than ever.
Unpinned. You will need to purchase the correct pins for your setup. If you measure your current wires and purchase the correct pins, we can cut and pin this heater upon request.
E3D High Temperature Heater Cartridge$75.90
Heaters capable of operating up to 550°C for extended periods of time. For printing high temperature thermoplastics. Come with high amperage connectors and extension leads, the cartridge has the wires exiting at a 90° angle from the casing with a strain relief.
Power: Up to 65W
Max operating temp: 550°C.
Lead length: 2m
– These heaters are more than capable of reaching temperatures that will soften the aluminium block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.
E3D Nozzle X – Volcano$36.30
E3D Nozzle X – Volcano
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which provides a fantastic balance of cost and wear resistance. The cherry on the top? Our NEW WS2 ‘polyphobic’ nano coating, no longer will you find hot molten polymers sticking to your nozzle
E3D Nozzle X – V6$33.00
E3D Nozzle X – V6
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which provides a fantastic balance of cost and wear resistance. The cherry on the top? Our NEW WS2 ‘polyphobic’ nano coating, no longer will you find hot molten polymers sticking to your nozzle.
E3D Volcano Nozzles – Plated Copper$17.59
Durable, non-stick, extremely high temperature performance Volcano nozzles. Take your your 3D printing to the next level by modifying your Volcano with these nozzles. Made from a unique copper alloy, they will not begin to soften or anneal below 500°C, and they are highly resistant to debris and burnt-on plastic thanks to their nickel coating. Compatible with the Lulzbot Moarstruder.
E3D Nozzles – Plated Copper$14.29
Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can’t handle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
E3D Experimental High Resolution Nozzles$21.99
These are the high resolution nozzles from E3D, that offer a very small nozzle size for super high detailed prints at a size of 0.15mm. The smallest nozzle that E3D makes. Can be distinguished by having two dots on one hex side.