LulzBot TAZ6 Single Extruder Tool Head v2.1 – USED

$135.00$155.00

Original single extruder tool head for the LulzBot TAZ 6.  USED but in good working condition.

Subtotal:

Add-ons total:

Total:

Description

LulzBot® TAZ 6 Single Extruder Tool Head v2.1

Built with an all metal LulzBot® Hexagon hot end capable of heating up to to 300°C (572°F), so it easily handles standard filaments like HIPS, PLA, and ABS, as well as advanced filaments including heavy duty nylon, T-Glase, and polycarbonate.

Upgrades from the version 2 tool head include dual filament cooling fans for even cooling for both sides, which prevents offside drooping, and a larger heat sink cooling fans to reduce heat creep.

Installing the TAZ 6 V 2.1 on your TAZ 5? You’ll need to make the following modifications:

– Bend the X min switch lever
– Print and install a TAZ 6 X Carriage Guide
– Adjust the cooling settings in your profiles for the additional cooling
(With thanks to Joseph):
– Some TAZ 5 V2C toolhead harnesses have 2 locating pins to prevent plugging the toolhead in backwards. As the TAZ 6 adds a sense wire that is not needed on the TAZ 5, one of the locating pins will need to be removed from the TAZ 5 harness. You can remove the pin by pushing in the small silver retaining tab on the connector housing.
– You may also need to adjust your build plate size in whatever slicer you are using. Having bent the switch out, the extruder now thinks the edge of the bed is about 6mm to the right of its actual edge.
USED – Doesn’t have any new stuff installed, just a good used working toolhead.  May need hotend cleaned but will print.
REFURBISHED – Has had the hotend and or new nozzle installed depending on condition.  Cleaned and ready to print, in clean condition.

Additional information

Weight 3 lbs
Dimensions 11 × 9 × 4 in
Condition

Refurbished, Toolhead only, no accessories, Used

Connector

TAZ 6

Nozzle

.5mm

Diameter

3mm

Reviews

There are no reviews yet.

Be the first to review “LulzBot TAZ6 Single Extruder Tool Head v2.1 – USED”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Content missing