Heat-set insert installation tip for Weller M2 M2.5 M3 M4 M5

$29.99

Save your good soldering iron tips while gaining better control while installing heat inserts. These heat set insert installation tips replace the stock tip on your soldering iron and are used for installing heat-set threaded inserts in plastic parts.
Compatible with Weller soldering irons.

SET OF 5 TIPS

 

In stock (can be backordered)

Subtotal:

Add-ons total:

Total:

SKU: 9853 Categories: , Tags: , , , , , , , , , ,

Description

Heat set inserts are a great way to improve connection strength between 3D printed parts. However, if you have tried to set heat-set inserts in your plastic or 3D printed part with your soldering iron, you may have had the frustration of pushing the insert in only to have it come right back out stuck to your soldering iron and ruining your part in the process. Most soldering iron tips can catch on the rim of the insert causing it to stick on the iron when you pull the iron out. If you use the “horizontal method” it’s hard to know the insert is straight. Our inserts have a vertical wall that solves that problem. The iron pulls right out after pressing the hot insert. Because the shoulder is square it’s easier to know if the insert is square in the piece, something that’s harder to control with a conical soldering tip. The shank is much longer (0.75″) and narrower than what you get with the McMaster-Carr insert tip (only 0.25″ long), allowing you to set small inserts into corners of parts without melting the side of the part. This is especially useful if you’re mounting a circuit board in a 3D printed box or doing a mounting that requires the insert to come close to the edge of the part. Who wants to pay $15 plus shipping just for one size McMaster tip that is only a few millimeters long and only good for a few types of applications? Who wants to buy another soldering iron just to fit the tip? 5 tips included, M2 M2.5 M3 M4 M5.

  • Longer shank than McMaster tip allows you to reach deeper into 3D printed parts and tight corners to install heat-set inserts without touching your iron and melting the plastic
  • Installation tip works better than soldering iron tip since conical tips can catch on the insert and accidentally pull the insert out while melting the plastic and ruining the part.
  • Not intended to be used for soldering. Soldering iron not included.
  • PLEASE NOT THIS IS FOR THE Weller WES 51 iron. 5.4mm diameter.  PLEASE MEASURE THE DIAMETER OF YOUR OPENING.

 

Additional information

Weight .25 lbs
Dimensions 4 × 1 × 1 in

Reviews

There are no reviews yet.

Be the first to review “Heat-set insert installation tip for Weller M2 M2.5 M3 M4 M5”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Content missing