Beam Air : The Universal Laser Cutter Fume Extractor

$899.00

Notice: This product currently has an increased delivery time of 10-14 business days.

FLUX Beam Air

The Universal Laser Cutter Fume Extractor

The Beam Air is a universal fume extractor for laser cutters. Whether planning to buy a laser cutter for home, hobby, or business use, the Beam Air can provide the ability to minimize or eliminate a majority of particles and scents of materials in use for almost any laser cutter. If already using a laser cutter, the strong scents and particles that could be emitted from the laser cut material may be all too familiar. The Beam Air can efficiently solve these problems by using four layers of technologically advanced filters.

Subtotal:

Add-ons total:

Total:

SKU: 18116 Category: Tags: , , ,

Description

Pre-Filter

This is the first layer of defense! The pre-filter is positioned on the top of the Beam Air, so it is the first filter that will be preventing particles from passing through – coming from the laser cutter which is connected via a tube. Because this filter is the thinnest and the top layer, this filter will need to be replaced after every 10 – 30 hours of use.

Medium Efficiency Filter

Just below the pre-filter, the medium efficiency filter provides a buffer and further filtering out particles which managed to get through the pre-filter. To ensure the Beam Air is eliminating as many particles from passing to the outside environment, this filter will need to be replaced after every 50 – 150 hours of use.

H13 HEPA Filter

The third section of the Beam Air is known as the H13 HEPA Filter and as it is near the center of the Beam Air, it filters out the few remaining particles that may have penetrated past the other two filters. This filter will need to be replaced after every 100 – 200 hours of use.

Activated Charcoal Filter

This is the bottom filter, or final filter, of the Beam Air. Particles have to make it past three other filters to reach this one. This filter can eliminate almost all of the particles at this point, allowing for the Beam Air to be a proficient fume extractor. This long-lasting filter will need to be replaced after every 300 – 600 hours of use.

Compatible With:

  • FLUX beamo
  • FLUX Beambox
  • FLUX Beambox Pro
  • Glowforge Pro
  • Glowforge Plus
  • Glowforge Basic
  • Dremel Digilab LC40
  • Emblaser 2
  • Makeblock
  • K40
  • And Many More!

Technical Specifications

Max System Flow 353 CFM
Inlet Diameter Φ 100mm
Product Dimensions 14.57″ x 10.24″ x 17.72″ (37 x 26 x 45cm)
Package Size 19.29″ x 14.57″ x 19.69″ (49 x 37 x 50cm)
Weight 37.5lbs. (17kg)
Voltage AC 110V/220V
Power 180W

Additional information

Weight 40 lbs
Dimensions 16 × 12 × 18 in

Reviews

There are no reviews yet.

Be the first to review “Beam Air : The Universal Laser Cutter Fume Extractor”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Content missing